LT-S8328XG-4XS16GX8GC
SmartByte LT-S8328XG-4XS16GX8GC is the Layer 2+ managed Gigabit switch. The series deliver full Gigabit access and unparalleled scalability to 10G performance. It provides high-density performance, Layer 3 static routing with 128 Gbps switching capacity. The LT-S8328XG-4XS16GX8GC provides comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful network security features also make the LT-S8328XG-4XS16GX8GC perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
➢ 4*1G/2.5G/10G SFP+ slots uplink, 16*100/1000M SFP ports + 8*1G SFP/RJ45 COMBO ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 512MB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay.
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x,port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | ||||
Interface | 1G/2.5G/10G Fiber ports | 100/1000 Fiber ports | Gigabit Combo | |
4 | 16 | 8 | ||
Ethernet | 16*100/1000Base-X SFP 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ | |||
CPU | Marvell AC5 series 1.2GHz | |||
Size of RAM | 512MB | |||
Size of Flash | 512MB | |||
Switch chip model | Marvell AC5 series | |||
Management port | 1*RJ45 Console port (115200,8,N,1), 1*USB 2.0 | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | ||
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | ||
1-8 (Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
1-8 (Copper speed indicators) Yellow | Off: ports on 10/100M | |||
On: ports on 1000M | ||||
1-8(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
9-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | 1* AC 100-240V input on default 1* DC 36-72V input optional 2* AC 100-240V input optional 1* AC 100-240V input + 1* DC 36-72V input optional | |||
Total power consumption | Full loading ≤36W | |||
Over-current protection | Support | |||
Layer 2 switching | ||||
Port aggregation | Support GE port aggregation | |||
Support 2.5GE aggregation | ||||
Support 10GE aggregation | ||||
Support static aggregation | ||||
Support LACP dynamic aggregation | ||||
Up to 64 aggregation groups and up to 8 ports per group | ||||
Port features | Support IEEE802.3x flow control | |||
Support interface counters | ||||
Support port isolation | ||||
Port mirroring (One-to-One, Many-to-One) | ||||
Support loop detection (Port-based; VLAN-based) | ||||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | ||||
VLAN | IEEE802.1Q tagged VLAN | |||
Mac based VLAN | ||||
IP based VLAN | ||||
Protocol based VLAN | ||||
Voice VLAN, specially divide VLAN for user voice data flow | ||||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | ||||
VLAN range: 1-4094 | ||||
Support access mode/trunk mode/hybrid mode | ||||
Mac-address table management | Support static Mac-address management | |||
Support dynamic Mac-address Management | ||||
Support filtering Mac-address | ||||
Support MAC limit based on port and VLAN | ||||
Support MAC flapping based on port and VLAN | ||||
16K Mac-address table size | ||||
GVRP | Normal mode | |||
Fixed mode | ||||
Forbidden mode | ||||
QinQ | Port-based QinQ | |||
VLAN-based QinQ | ||||
VLAN mapping | ||||
Flow-based QinQ | ||||
LLDP | Link Layer Discovery Protocol | |||
Med | ||||
SPAN | Number of Sessions: 7 | |||
Many-to-one | ||||
RSPAN | Remote Switch Port Analyzer | |||
MSTP | 802.1D STP | |||
802.1W RSTP | ||||
802.1S MSTP | ||||
BPDU Guard | ||||
Number of Single Ring Device Connections: 20 | ||||
ERPS G.8032 | Major ring | |||
Sub ring | ||||
Recovery time ≤20ms | ||||
Number of Single Ring Device Connections: No limit | ||||
QoS | QoS Class, Remarking | |||
Support SP, WRR Queue Scheduling | ||||
Ingress Port-based Rate-limit | ||||
Egress Port-based Rate-limit | ||||
Egress port-queue shaper | ||||
Policy-based QoS | ||||
Port Queue Numbers: 8 | ||||
DHCPv4 Snooping | DHCP snooping trust port | |||
DHCP snooping option-82 | ||||
DHCP snooping circuit-id and remote-id customized | ||||
L2 Multicast | ||||
IGMP | IGMP v1, v2, v3 | |||
IGMP Snooping | Internet Group Management Protocol Snooping | |||
Fast Leave | ||||
Multicast Table Size: 1K | ||||
PIM-SM | Protocol Independent Multicast-Sparse Mode | |||
Security features | ||||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | |||
802.1x | Port access control Mac-address access control RADIUS server | |||
Port-security | Port-security | |||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | |||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | |||
DAI | Dynamic ARP Inspection | |||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | |||
Ddos | Ddos attack protection | |||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | |||
AAA | RADIUS authentication access switch | |||
TACACS authentication access switch | ||||
Authorization | ||||
Reliability | ||||
Loop Detect | Loop detect, based on port or VLAN | |||
EFM | The Ethernet in the first mile, 802.3ah | |||
Management & Maintenance functions | ||||
Dual Stack | IPv4 and IPv6 Dual Stack Management | |||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | |||
Support connecting up to 3 Servers | ||||
For IPv4 and IPv6 | ||||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | |||
Local Management of User Privilege | ||||
Remote authorization by RADIUS or TARCAS | ||||
Enable privilege protection | ||||
User password complexity requirements | ||||
User login fail protection | ||||
User Privilege Level 0 to 15 | ||||
Login Service Management | Up to 8 users online simultaneously | |||
Access control based on IPv4 or IPv6 ACL | ||||
Firmware Management | Firmware upgraded by WEB | |||
Firmware upgraded by CLI | ||||
Dual partition | ||||
Web Management | Web Management | |||
Support HTTP V1.1 | ||||
Support HTTPS | ||||
For IPv4 and IPv6 | ||||
CLI management | Console/Telnet command line management | |||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | |||
Dying gasp optional | ||||
Optical transceiver DDM | ||||
One click fault information collection | ||||
Cable detection | ||||
DNS | Domain Name System | |||
NTP | Network Time Protocol, For IPv4 and IPv6 | |||
Support domain name configuration | ||||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | |||
sFlow | Sampled flow | |||
SNMP | Version SNMPV2C/V3 | |||
MQTT | Message Queuing Telemetry Transport | |||
RMON | Support RMON (Remote Monitoring) alarm | |||
Dual partition management | Support dual partition switching | |||
Application Protocol Functions | ||||
Telnet server | Support telnet server for IPv4 and IPv6 | |||
Telnet client | Support telnet client for IPv4 and IPv6 | |||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | |||
SFTP | sftp client/server for IPv4 and IPv6 | |||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | |||
Support public key-based login | ||||
TACACS | Support TACACS (the terminal access controller accesses the control system) | |||
TFTP | Support TFTP Client | |||
Layer 3 features | ||||
Static Route | Support VLAN interface and route port | |||
IPv4 static routing table entry configuration | ||||
ARP dynamic learning and static configuration | ||||
IPv6 static routing table entry configuration | ||||
Neighbor discovery and static configuration | ||||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | ||||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | |||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | |||
DHCPv4 Relay | DHCP Relay for IPv4 | |||
DHCPv4 Server | DHCP Server for IPv4 | |||
Switching features | ||||
Switching capacity | 128Gbps | |||
Packet forwarding rate | 190.4Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12Mbit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Installation method | Desktop; Rack-mount | |||
Dimension(W*D*H) mm | 440*245*45mm | |||
Weight | 3.65kg | |||
Operating environment | ||||
Operating temperature | 0℃~ +50℃ | |||
Storage/transportation temperature | -10℃~ +70℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Protection | Surge protection of power: 4KV | |||
Surge protection of Ethernet ports: 4KV | ||||
ESD: Contact 6kV, Air 8kV | ||||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | |||
MTBF | >100,000 hours | |||
Warranty | 3 years | |||

Description | |
Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,AC 100-240V 50/60Hz | |
LT-S8328XG-4XS16GX8GC-2AC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,dual AC 100-240V 50/60Hz |
LT-S8328XG-4XS16GX8GC-AC-DC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,one AC 100~240V 50/60Hz and one DC 36-72V input |

Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-S8328XG-4XS16GX8GC
SmartByte LT-S8328XG-4XS16GX8GC is the Layer 2+ managed Gigabit switch. The series deliver full Gigabit access and unparalleled scalability to 10G performance. It provides high-density performance, Layer 3 static routing with 128 Gbps switching capacity. The LT-S8328XG-4XS16GX8GC provides comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful network security features also make the LT-S8328XG-4XS16GX8GC perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
➢ 4*1G/2.5G/10G SFP+ slots uplink, 16*100/1000M SFP ports + 8*1G SFP/RJ45 COMBO ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 512MB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay.
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x,port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | ||||
Interface | 1G/2.5G/10G Fiber ports | 100/1000 Fiber ports | Gigabit Combo | |
4 | 16 | 8 | ||
Ethernet | 16*100/1000Base-X SFP 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ | |||
CPU | Marvell AC5 series 1.2GHz | |||
Size of RAM | 512MB | |||
Size of Flash | 512MB | |||
Switch chip model | Marvell AC5 series | |||
Management port | 1*RJ45 Console port (115200,8,N,1), 1*USB 2.0 | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | ||
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | ||
1-8 (Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
1-8 (Copper speed indicators) Yellow | Off: ports on 10/100M | |||
On: ports on 1000M | ||||
1-8(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
9-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | 1* AC 100-240V input on default 1* DC 36-72V input optional 2* AC 100-240V input optional 1* AC 100-240V input + 1* DC 36-72V input optional | |||
Total power consumption | Full loading ≤36W | |||
Over-current protection | Support | |||
Layer 2 switching | ||||
Port aggregation | Support GE port aggregation | |||
Support 2.5GE aggregation | ||||
Support 10GE aggregation | ||||
Support static aggregation | ||||
Support LACP dynamic aggregation | ||||
Up to 64 aggregation groups and up to 8 ports per group | ||||
Port features | Support IEEE802.3x flow control | |||
Support interface counters | ||||
Support port isolation | ||||
Port mirroring (One-to-One, Many-to-One) | ||||
Support loop detection (Port-based; VLAN-based) | ||||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | ||||
VLAN | IEEE802.1Q tagged VLAN | |||
Mac based VLAN | ||||
IP based VLAN | ||||
Protocol based VLAN | ||||
Voice VLAN, specially divide VLAN for user voice data flow | ||||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | ||||
VLAN range: 1-4094 | ||||
Support access mode/trunk mode/hybrid mode | ||||
Mac-address table management | Support static Mac-address management | |||
Support dynamic Mac-address Management | ||||
Support filtering Mac-address | ||||
Support MAC limit based on port and VLAN | ||||
Support MAC flapping based on port and VLAN | ||||
16K Mac-address table size | ||||
GVRP | Normal mode | |||
Fixed mode | ||||
Forbidden mode | ||||
QinQ | Port-based QinQ | |||
VLAN-based QinQ | ||||
VLAN mapping | ||||
Flow-based QinQ | ||||
LLDP | Link Layer Discovery Protocol | |||
Med | ||||
SPAN | Number of Sessions: 7 | |||
Many-to-one | ||||
RSPAN | Remote Switch Port Analyzer | |||
MSTP | 802.1D STP | |||
802.1W RSTP | ||||
802.1S MSTP | ||||
BPDU Guard | ||||
Number of Single Ring Device Connections: 20 | ||||
ERPS G.8032 | Major ring | |||
Sub ring | ||||
Recovery time ≤20ms | ||||
Number of Single Ring Device Connections: No limit | ||||
QoS | QoS Class, Remarking | |||
Support SP, WRR Queue Scheduling | ||||
Ingress Port-based Rate-limit | ||||
Egress Port-based Rate-limit | ||||
Egress port-queue shaper | ||||
Policy-based QoS | ||||
Port Queue Numbers: 8 | ||||
DHCPv4 Snooping | DHCP snooping trust port | |||
DHCP snooping option-82 | ||||
DHCP snooping circuit-id and remote-id customized | ||||
L2 Multicast | ||||
IGMP | IGMP v1, v2, v3 | |||
IGMP Snooping | Internet Group Management Protocol Snooping | |||
Fast Leave | ||||
Multicast Table Size: 1K | ||||
PIM-SM | Protocol Independent Multicast-Sparse Mode | |||
Security features | ||||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | |||
802.1x | Port access control Mac-address access control RADIUS server | |||
Port-security | Port-security | |||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | |||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | |||
DAI | Dynamic ARP Inspection | |||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | |||
Ddos | Ddos attack protection | |||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | |||
AAA | RADIUS authentication access switch | |||
TACACS authentication access switch | ||||
Authorization | ||||
Reliability | ||||
Loop Detect | Loop detect, based on port or VLAN | |||
EFM | The Ethernet in the first mile, 802.3ah | |||
Management & Maintenance functions | ||||
Dual Stack | IPv4 and IPv6 Dual Stack Management | |||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | |||
Support connecting up to 3 Servers | ||||
For IPv4 and IPv6 | ||||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | |||
Local Management of User Privilege | ||||
Remote authorization by RADIUS or TARCAS | ||||
Enable privilege protection | ||||
User password complexity requirements | ||||
User login fail protection | ||||
User Privilege Level 0 to 15 | ||||
Login Service Management | Up to 8 users online simultaneously | |||
Access control based on IPv4 or IPv6 ACL | ||||
Firmware Management | Firmware upgraded by WEB | |||
Firmware upgraded by CLI | ||||
Dual partition | ||||
Web Management | Web Management | |||
Support HTTP V1.1 | ||||
Support HTTPS | ||||
For IPv4 and IPv6 | ||||
CLI management | Console/Telnet command line management | |||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | |||
Dying gasp optional | ||||
Optical transceiver DDM | ||||
One click fault information collection | ||||
Cable detection | ||||
DNS | Domain Name System | |||
NTP | Network Time Protocol, For IPv4 and IPv6 | |||
Support domain name configuration | ||||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | |||
sFlow | Sampled flow | |||
SNMP | Version SNMPV2C/V3 | |||
MQTT | Message Queuing Telemetry Transport | |||
RMON | Support RMON (Remote Monitoring) alarm | |||
Dual partition management | Support dual partition switching | |||
Application Protocol Functions | ||||
Telnet server | Support telnet server for IPv4 and IPv6 | |||
Telnet client | Support telnet client for IPv4 and IPv6 | |||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | |||
SFTP | sftp client/server for IPv4 and IPv6 | |||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | |||
Support public key-based login | ||||
TACACS | Support TACACS (the terminal access controller accesses the control system) | |||
TFTP | Support TFTP Client | |||
Layer 3 features | ||||
Static Route | Support VLAN interface and route port | |||
IPv4 static routing table entry configuration | ||||
ARP dynamic learning and static configuration | ||||
IPv6 static routing table entry configuration | ||||
Neighbor discovery and static configuration | ||||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | ||||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | |||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | |||
DHCPv4 Relay | DHCP Relay for IPv4 | |||
DHCPv4 Server | DHCP Server for IPv4 | |||
Switching features | ||||
Switching capacity | 128Gbps | |||
Packet forwarding rate | 190.4Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12Mbit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Installation method | Desktop; Rack-mount | |||
Dimension(W*D*H) mm | 440*245*45mm | |||
Weight | 3.65kg | |||
Operating environment | ||||
Operating temperature | 0℃~ +50℃ | |||
Storage/transportation temperature | -10℃~ +70℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Protection | Surge protection of power: 4KV | |||
Surge protection of Ethernet ports: 4KV | ||||
ESD: Contact 6kV, Air 8kV | ||||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | |||
MTBF | >100,000 hours | |||
Warranty | 3 years | |||

Description | |
Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,AC 100-240V 50/60Hz | |
LT-S8328XG-4XS16GX8GC-2AC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,dual AC 100-240V 50/60Hz |
LT-S8328XG-4XS16GX8GC-AC-DC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,one AC 100~240V 50/60Hz and one DC 36-72V input |

Copy product links
Long by picture save/share
LT-S8328XG-4XS16GX8GC
SmartByte LT-S8328XG-4XS16GX8GC is the Layer 2+ managed Gigabit switch. The series deliver full Gigabit access and unparalleled scalability to 10G performance. It provides high-density performance, Layer 3 static routing with 128 Gbps switching capacity. The LT-S8328XG-4XS16GX8GC provides comprehensive end to end QoS as well as flexible and rich management, security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. The powerful network security features also make the LT-S8328XG-4XS16GX8GC perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
➢ 4*1G/2.5G/10G SFP+ slots uplink, 16*100/1000M SFP ports + 8*1G SFP/RJ45 COMBO ports downlink, 1*RJ45 console interface for switch basic management and setup.
➢ Hardware: Marvell AC5 series 1.2GHz CPU, Marvell AC5 series switch chipsets, 512MB RAM and 512MB flash
➢ Layer 3 features: IPv4/IPv6 static routing, DHCPv4/ DHCPv6 client, DHCPv4 relay, DHCP relay.
➢ Port features: Supports port aggregation, IEEE802.3x flow control, port isolation, port mirroring, loop detection and
broadcast storm suppression
➢ VLAN: Supports IEEE802.1Q tagged VLAN, mac based VLAN, IP based VLAN, protocol based VLAN, voice VLAN and
private VLAN.
➢ QinQ: Supports port-based, VLAN-based and flow-based QinQ
➢ Supports GVRP/LLDP/SPAN/RSPAN/DHCPv4 snooping
➢ Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring
➢ Multicast: IGMP snooping, IGMP v1, v2, v3, PIM-SM
➢ QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Egress port-based rate-limit
and policy-based QoS
➢ Security: Supports ACL, 802.1x,port-security, IP source guard, ARP-check, DAI, anti-gateway ARP spoofing,
Ddos attack protection, telnet/SSH/HTTP/HTTPS user access control and AAA.
➢ Reliability: Loop detect based on port or VLAN, the Ethernet in the first mile 802.3ah
➢ Management: Supports IPv4/IPv6 dual stack management, system log management, user management,
login service management, firmware management, web management, CLI management, fault detection, DNS,
NTP, sFlow, SNMP, MQTT, RMON and dual partition management.
➢ Application protocol: Supports telnet server, telnet client, SCP, SFTP, SSH server, TACACS and TFTP client
Model No. | ||||
Interface | 1G/2.5G/10G Fiber ports | 100/1000 Fiber ports | Gigabit Combo | |
4 | 16 | 8 | ||
Ethernet | 16*100/1000Base-X SFP 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ | |||
CPU | Marvell AC5 series 1.2GHz | |||
Size of RAM | 512MB | |||
Size of Flash | 512MB | |||
Switch chip model | Marvell AC5 series | |||
Management port | 1*RJ45 Console port (115200,8,N,1), 1*USB 2.0 | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3ae 10Gigabit Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP | |||
LED Indicators | ||||
PWR (Power indicator) | Off: the device is power off or failed | On: the device power on is normal | ||
SYS (System status indicator) | Blinking: device initialization | On: device on normal operation | ||
1-8 (Copper ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
1-8 (Copper speed indicators) Yellow | Off: ports on 10/100M | |||
On: ports on 1000M | ||||
1-8(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
9-28(Fiber ports indicators) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameter | ||||
Input voltage | 1* AC 100-240V input on default 1* DC 36-72V input optional 2* AC 100-240V input optional 1* AC 100-240V input + 1* DC 36-72V input optional | |||
Total power consumption | Full loading ≤36W | |||
Over-current protection | Support | |||
Layer 2 switching | ||||
Port aggregation | Support GE port aggregation | |||
Support 2.5GE aggregation | ||||
Support 10GE aggregation | ||||
Support static aggregation | ||||
Support LACP dynamic aggregation | ||||
Up to 64 aggregation groups and up to 8 ports per group | ||||
Port features | Support IEEE802.3x flow control | |||
Support interface counters | ||||
Support port isolation | ||||
Port mirroring (One-to-One, Many-to-One) | ||||
Support loop detection (Port-based; VLAN-based) | ||||
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) | ||||
VLAN | IEEE802.1Q tagged VLAN | |||
Mac based VLAN | ||||
IP based VLAN | ||||
Protocol based VLAN | ||||
Voice VLAN, specially divide VLAN for user voice data flow | ||||
Private VLAN, divide a VLAN broadcast domain into multiple subdomains to form a double-layer VLAN structure | ||||
VLAN range: 1-4094 | ||||
Support access mode/trunk mode/hybrid mode | ||||
Mac-address table management | Support static Mac-address management | |||
Support dynamic Mac-address Management | ||||
Support filtering Mac-address | ||||
Support MAC limit based on port and VLAN | ||||
Support MAC flapping based on port and VLAN | ||||
16K Mac-address table size | ||||
GVRP | Normal mode | |||
Fixed mode | ||||
Forbidden mode | ||||
QinQ | Port-based QinQ | |||
VLAN-based QinQ | ||||
VLAN mapping | ||||
Flow-based QinQ | ||||
LLDP | Link Layer Discovery Protocol | |||
Med | ||||
SPAN | Number of Sessions: 7 | |||
Many-to-one | ||||
RSPAN | Remote Switch Port Analyzer | |||
MSTP | 802.1D STP | |||
802.1W RSTP | ||||
802.1S MSTP | ||||
BPDU Guard | ||||
Number of Single Ring Device Connections: 20 | ||||
ERPS G.8032 | Major ring | |||
Sub ring | ||||
Recovery time ≤20ms | ||||
Number of Single Ring Device Connections: No limit | ||||
QoS | QoS Class, Remarking | |||
Support SP, WRR Queue Scheduling | ||||
Ingress Port-based Rate-limit | ||||
Egress Port-based Rate-limit | ||||
Egress port-queue shaper | ||||
Policy-based QoS | ||||
Port Queue Numbers: 8 | ||||
DHCPv4 Snooping | DHCP snooping trust port | |||
DHCP snooping option-82 | ||||
DHCP snooping circuit-id and remote-id customized | ||||
L2 Multicast | ||||
IGMP | IGMP v1, v2, v3 | |||
IGMP Snooping | Internet Group Management Protocol Snooping | |||
Fast Leave | ||||
Multicast Table Size: 1K | ||||
PIM-SM | Protocol Independent Multicast-Sparse Mode | |||
Security features | ||||
ACL | IP Standard ACL IP Extended ACL MAC extend ACL IPv6 ACL Time Range ACL apply on VLAN ACL entries, include input and output | |||
802.1x | Port access control Mac-address access control RADIUS server | |||
Port-security | Port-security | |||
IP source guard | IP Source Guard, Port-based IP/Mac Binding Access | |||
ARP-check | Support ARP-check and ARP packet filtering for illegal users | |||
DAI | Dynamic ARP Inspection | |||
Anti-gateway ARP Spoofing | Prevent Gateway ARP Spoofing | |||
Ddos | Ddos attack protection | |||
Access control | Support Telnet/SSH/HTTP/HTTPS user access control | |||
AAA | RADIUS authentication access switch | |||
TACACS authentication access switch | ||||
Authorization | ||||
Reliability | ||||
Loop Detect | Loop detect, based on port or VLAN | |||
EFM | The Ethernet in the first mile, 802.3ah | |||
Management & Maintenance functions | ||||
Dual Stack | IPv4 and IPv6 Dual Stack Management | |||
System Log Management | Syslog Level 7 to 0 Corresponding Debug/Info/Notice/Warning/ Err/ Critical/ Alert | |||
Support connecting up to 3 Servers | ||||
For IPv4 and IPv6 | ||||
User Management | Support password protection, support MD5/SHA256/SHA512 algorithm | |||
Local Management of User Privilege | ||||
Remote authorization by RADIUS or TARCAS | ||||
Enable privilege protection | ||||
User password complexity requirements | ||||
User login fail protection | ||||
User Privilege Level 0 to 15 | ||||
Login Service Management | Up to 8 users online simultaneously | |||
Access control based on IPv4 or IPv6 ACL | ||||
Firmware Management | Firmware upgraded by WEB | |||
Firmware upgraded by CLI | ||||
Dual partition | ||||
Web Management | Web Management | |||
Support HTTP V1.1 | ||||
Support HTTPS | ||||
For IPv4 and IPv6 | ||||
CLI management | Console/Telnet command line management | |||
Fault Detection | Ping/Traceroute, For IPv4 and IPv6 | |||
Dying gasp optional | ||||
Optical transceiver DDM | ||||
One click fault information collection | ||||
Cable detection | ||||
DNS | Domain Name System | |||
NTP | Network Time Protocol, For IPv4 and IPv6 | |||
Support domain name configuration | ||||
Configuration Import /Export | FTP/TFTP based remote configuration import and export | |||
sFlow | Sampled flow | |||
SNMP | Version SNMPV2C/V3 | |||
MQTT | Message Queuing Telemetry Transport | |||
RMON | Support RMON (Remote Monitoring) alarm | |||
Dual partition management | Support dual partition switching | |||
Application Protocol Functions | ||||
Telnet server | Support telnet server for IPv4 and IPv6 | |||
Telnet client | Support telnet client for IPv4 and IPv6 | |||
SCP (Secure Copy Protocol) | SCP client/server for IPv4 and IPv6 | |||
SFTP | sftp client/server for IPv4 and IPv6 | |||
SSH server | Support login based on user password-SSH2, support IPv4, IPv6 | |||
Support public key-based login | ||||
TACACS | Support TACACS (the terminal access controller accesses the control system) | |||
TFTP | Support TFTP Client | |||
Layer 3 features | ||||
Static Route | Support VLAN interface and route port | |||
IPv4 static routing table entry configuration | ||||
ARP dynamic learning and static configuration | ||||
IPv6 static routing table entry configuration | ||||
Neighbor discovery and static configuration | ||||
Routing prefix table size 4k for IPv4, for IPv6 divide by 4 | ||||
DHCPv4 Client | Dynamic host configuration protocol for IPv4 | |||
DHCPv6 Client | Dynamic host configuration protocol for IPv6 | |||
DHCPv4 Relay | DHCP Relay for IPv4 | |||
DHCPv4 Server | DHCP Server for IPv4 | |||
Switching features | ||||
Switching capacity | 128Gbps | |||
Packet forwarding rate | 190.4Mpps | |||
MAC address table | 16K | |||
VLAN | 4K | |||
Buffer | 12Mbit | |||
Forwarding delay | <5us | |||
Jumbo Frame | Support 10Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Mechanical structure | ||||
Installation method | Desktop; Rack-mount | |||
Dimension(W*D*H) mm | 440*245*45mm | |||
Weight | 3.65kg | |||
Operating environment | ||||
Operating temperature | 0℃~ +50℃ | |||
Storage/transportation temperature | -10℃~ +70℃ | |||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |||
Protection | Surge protection of power: 4KV | |||
Surge protection of Ethernet ports: 4KV | ||||
ESD: Contact 6kV, Air 8kV | ||||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | |||
MTBF | >100,000 hours | |||
Warranty | 3 years | |||

Description | |
Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,AC 100-240V 50/60Hz | |
LT-S8328XG-4XS16GX8GC-2AC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,dual AC 100-240V 50/60Hz |
LT-S8328XG-4XS16GX8GC-AC-DC | Layer 2+ managed Ethernet switch with 4*1G/2.5G/10G SFP+ ports + 16*100/1000M SFP ports,8*1G SFP/RJ45 COMBO ports,one AC 100~240V 50/60Hz and one DC 36-72V input |

Copy product links
Long by picture save/share

Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch