5-port fast industrial PoE switch

Overview

The SmartByte LT-IS3005FP-1FX4TX is the unmanaged industrial grade PoE switch with 4-port 10/100Base-TX PoE and 1-port 100Base-FX fiber optical interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, it is featuring with port isolation, 250m long distance transmission mode(1-4 ports), QoS(1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.

LT-IS3005FP-1FX4TX is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃ ~+75℃ as well as high-level EMI/EMC capability and so on. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.

Features

➢ 4*10/100Base-TX RJ45 PoE ports, 2*100Base-FX SFP fiber ports

➢ DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection

➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard

➢ Dip switch function: 1.Port isolation; 2. 250m long distance; 3. QoS; 4.PoE watchdog

➢ Support 9K Bytes Jumbo frame

➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection

➢ IP40 fan-less and Din-rail hardware design

➢ Operation temperature: -40 ℃ ~+75℃

Model No.	LT-IS3005FP-1FX4TX
Interface	Fiber ports		Copper RJ45 ports
	2		4
Ethernet	410/100Base-TX PoE 1100Base-FX SFP
Standard	IEEE 802.310Base-TEthernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE
Dip Switch	1. Port Isolation 2. 250m long distance mode(1-4 ports) 3. QoS(1-2 ports） 4. PoE watchdog
LED Indicators	P(Power indicator)Green	Off: the device is power off or failed
		On: the device power on is normal
	S(PoE usage indicator)Red	Off: total PoE usage＜rated 50%
		Blinking: rated 50%＜total PoE usage＜rated 90%
		On: total PoE usage≥rated 90%
	1-4(Copper ports)	Green indicators		Yellow indicators
		Off: ports link down		Off: PoE not working
		On: ports link up		On: PoE working
		Blinking:data on TX/RX
	5 ( Fiber ports)Green	Off: ports link down
		On: ports link up
		Blinking:data on TX/RX
Power parameters
Input voltage	44-57VDC, redundant power input
Input current	3A Max
Total power consumption	Full loading without PoE ≤3W PoE power budget ≤ 120W
Connector	Removable 4-pin terminal block
Reverse polarity protection	Support
Over-voltage protection	Support
Switching features
Switching capacity	1G
Packet forwarding rate	1.48 Mpps
MAC address table	2K
VLAN	2K
Buffer	2Kbits
Forwarding delay	<100us
Jumbo Frame	Support 9Kbytes
MDX/MIDX	Support
Watchdog	Support
Network Topology
Star topology	Support
Bus topology	Support
Tree Topology	Support
Mechanical structure
Case protection	IP40
Installation method	Din-rail
Dimension(WDH)mm	3098130mm
Weight	0.56 kg
Operating environment
Operating temperature	-40℃~+75℃
Storage/transportation temperature	-40℃~+85℃
Relative humidity	5%~95%（non-condensing）
Industrial Standard	Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us)
	Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us)
	DIP: IEC 61000-4-11 Level 3（10V）
	ESD: IEC 61000-4-2 Level 4（8K/15K）
	Shock：IEC 60068-2-27
	Free fall：IEC 60068-2-32
	Vibration：IEC 60068-2-6
Certification	CCC/CE/FCC/RoHS
Warranty	5 years

LT-IS3005FP-1FX4TX datasheet

Model	Description
LT-IS3005FP-1FX4TX	10/100Base-TX to 100Base-FX unmanaged industrial PoE switch with 410/100Base-TX PoE ports and 2100Base-FX SFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Fiber ports transmission distance depending on the SFP module; Operation temperature: -40℃～+75℃

Unmanaged Industrial PoE Switches

410/100Base-TX PoE + 1100Base-FX SFP Industrial PoE Switch

Unmanaged Industrial PoE Switches

4*10/100Base-TX PoE + 1*100Base-FX SFP Industrial PoE Switch

410/100Base-TX PoE + 1100Base-FX SFP Industrial PoE Switch