Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
LT-IS3206G-2GX4GT
The SmartByte LT-IS3206G-2GX4GT is a highly reliable managed industrial Ethernet Switch with 4-port 10/100/1000-T and 2-port 100/1000Base-X fiber optical interfaces. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. LT-IS3206G-2GX4GT supports Web/SNMP/Telnet management, the managed features are such as QoS, VLAN, IGMP, Port mirroring, 802.1X, LLDP, Fiber transceiver DDM, IPV6 management and so on.
LT-IS3206G-2GX4GT is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.
➢ 4*10/100/1000Base-TX RJ45 ports, 2*100/1000Base-X SFP ports
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Support Layer 2 management function:
VLAN/Port Mirroring/IGMP/QoS/LLDP/802.1X/Fiber transceiver DDM
/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3206G-2GX4GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 4 | ||
Ethernet | 4*10/100/1000Base-T RJ45 2*100/1000Base-X SFP | ||
Management port | 1*RJ45 Console | ||
Standard | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control and back pressure IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree protocol IEEE 802.1Q VLAN tagging ITU-T G.8032 ERPS IEEE 802.1X port authentication network control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P(Power indicator) | Off: the device is power off or failed | Off: the device is power off or failed | |
S(System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-4 (Copper ports） | Green | Yellow | |
Off：ports link down | Off: port speed on 10/100M | ||
On: ports link up | On: port speed on 1000M | ||
Blinking: data on TX/RX | |||
5-6（fiber ports）Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-58VDC, redundant power input | ||
Input current | 0.5A Max | ||
Total consumption | Full loading ≤ 6W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Layer 2 function | |||
Support static aggregation Support dynamic aggregation | |||
Port features | Support IEEE802.3x flow control, Support Port traffic statistics Support port isolation Support network storm suppression based on port bandwidth percentage | ||
VLAN | Support access mode Support trunk mode Support hybrid mode | ||
Port mirroring | Support many to one port mirroring | ||
Ring network protocol | Support STP、RSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms | ||
Multicast | IGMP snooping | ||
QoS | Ingress Port-based Rate-limit Egress Port-based Rate-limit | ||
Security features | Support 802.1x，port authentication，MAC authentication，RADIUS service Support port isolation | ||
Management and maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support Ping , Tracert Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading | ||
Switching features | |||
Switching capacity | 12Gbps | ||
Packet forwarding rate | 17.8Mpps | ||
MAC address table | 8K | ||
VLAN | 4K | ||
Buffer | 1M bit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H) mm | 30*98*130mm | ||
Weight | 0.56 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature) | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||
DIP: IEC 61000-4-11 Level 3（10V） | |||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||
Shock：IEC 60068-2-27 | |||
Free fall：IEC 60068-2-32 | |||
Vibration：IEC 60068-2-6 | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞200,000 hours | ||
Warranty | 5 years | ||
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
LT-IS3206G-2GX4GT
The SmartByte LT-IS3206G-2GX4GT is a highly reliable managed industrial Ethernet Switch with 4-port 10/100/1000-T and 2-port 100/1000Base-X fiber optical interfaces. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. LT-IS3206G-2GX4GT supports Web/SNMP/Telnet management, the managed features are such as QoS, VLAN, IGMP, Port mirroring, 802.1X, LLDP, Fiber transceiver DDM, IPV6 management and so on.
LT-IS3206G-2GX4GT is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.
➢ 4*10/100/1000Base-TX RJ45 ports, 2*100/1000Base-X SFP ports
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Support Layer 2 management function:
VLAN/Port Mirroring/IGMP/QoS/LLDP/802.1X/Fiber transceiver DDM
/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3206G-2GX4GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 4 | ||
Ethernet | 4*10/100/1000Base-T RJ45 2*100/1000Base-X SFP | ||
Management port | 1*RJ45 Console | ||
Standard | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control and back pressure IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree protocol IEEE 802.1Q VLAN tagging ITU-T G.8032 ERPS IEEE 802.1X port authentication network control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P(Power indicator) | Off: the device is power off or failed | Off: the device is power off or failed | |
S(System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-4 (Copper ports） | Green | Yellow | |
Off：ports link down | Off: port speed on 10/100M | ||
On: ports link up | On: port speed on 1000M | ||
Blinking: data on TX/RX | |||
5-6（fiber ports）Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-58VDC, redundant power input | ||
Input current | 0.5A Max | ||
Total consumption | Full loading ≤ 6W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Layer 2 function | |||
Support static aggregation Support dynamic aggregation | |||
Port features | Support IEEE802.3x flow control, Support Port traffic statistics Support port isolation Support network storm suppression based on port bandwidth percentage | ||
VLAN | Support access mode Support trunk mode Support hybrid mode | ||
Port mirroring | Support many to one port mirroring | ||
Ring network protocol | Support STP、RSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms | ||
Multicast | IGMP snooping | ||
QoS | Ingress Port-based Rate-limit Egress Port-based Rate-limit | ||
Security features | Support 802.1x，port authentication，MAC authentication，RADIUS service Support port isolation | ||
Management and maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support Ping , Tracert Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading | ||
Switching features | |||
Switching capacity | 12Gbps | ||
Packet forwarding rate | 17.8Mpps | ||
MAC address table | 8K | ||
VLAN | 4K | ||
Buffer | 1M bit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H) mm | 30*98*130mm | ||
Weight | 0.56 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature) | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||
DIP: IEC 61000-4-11 Level 3（10V） | |||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||
Shock：IEC 60068-2-27 | |||
Free fall：IEC 60068-2-32 | |||
Vibration：IEC 60068-2-6 | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞200,000 hours | ||
Warranty | 5 years | ||
Copy product links
Long by picture save/share
LT-IS3206G-2GX4GT
The SmartByte LT-IS3206G-2GX4GT is a highly reliable managed industrial Ethernet Switch with 4-port 10/100/1000-T and 2-port 100/1000Base-X fiber optical interfaces. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. LT-IS3206G-2GX4GT supports Web/SNMP/Telnet management, the managed features are such as QoS, VLAN, IGMP, Port mirroring, 802.1X, LLDP, Fiber transceiver DDM, IPV6 management and so on.
LT-IS3206G-2GX4GT is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.
➢ 4*10/100/1000Base-TX RJ45 ports, 2*100/1000Base-X SFP ports
➢ DC 12~58V input, redundant power supply with polarity reverse protection
➢ Support Layer 2 management function:
VLAN/Port Mirroring/IGMP/QoS/LLDP/802.1X/Fiber transceiver DDM
/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3206G-2GX4GT | ||
Interface | Fiber ports | Copper RJ45 ports | |
2 | 4 | ||
Ethernet | 4*10/100/1000Base-T RJ45 2*100/1000Base-X SFP | ||
Management port | 1*RJ45 Console | ||
Standard | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control and back pressure IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree protocol IEEE 802.1Q VLAN tagging ITU-T G.8032 ERPS IEEE 802.1X port authentication network control IEEE 802.1ab LLDP IEEE 802.3ad LACP | ||
LED Indicators | |||
P(Power indicator) | Off: the device is power off or failed | Off: the device is power off or failed | |
S(System status indicator) | Blinking: device initialization | On: device on normal operation | |
1-4 (Copper ports） | Green | Yellow | |
Off：ports link down | Off: port speed on 10/100M | ||
On: ports link up | On: port speed on 1000M | ||
Blinking: data on TX/RX | |||
5-6（fiber ports）Green | Off: ports link down | ||
On: ports link up | |||
Blinking: data on TX/RX | |||
Power parameter | |||
Input voltage | 12-58VDC, redundant power input | ||
Input current | 0.5A Max | ||
Total consumption | Full loading ≤ 6W | ||
Connector | Removable 4-pin terminal block | ||
Reverse polarity protection | Support | ||
Layer 2 function | |||
Support static aggregation Support dynamic aggregation | |||
Port features | Support IEEE802.3x flow control, Support Port traffic statistics Support port isolation Support network storm suppression based on port bandwidth percentage | ||
VLAN | Support access mode Support trunk mode Support hybrid mode | ||
Port mirroring | Support many to one port mirroring | ||
Ring network protocol | Support STP、RSTP Support G.8032 ERPS protocol，single ring, sub Ring and associated sub ring Recovery time ≤20ms | ||
Multicast | IGMP snooping | ||
QoS | Ingress Port-based Rate-limit Egress Port-based Rate-limit | ||
Security features | Support 802.1x，port authentication，MAC authentication，RADIUS service Support port isolation | ||
Management and maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support Ping , Tracert Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading | ||
Switching features | |||
Switching capacity | 12Gbps | ||
Packet forwarding rate | 17.8Mpps | ||
MAC address table | 8K | ||
VLAN | 4K | ||
Buffer | 1M bit | ||
Forwarding delay | <5us | ||
Jumbo Frame | Support 10Kbytes | ||
MDI/MDIX | Support | ||
Watchdog | Support | ||
Mechanical structure | |||
Case protection | IP40 | ||
Installation method | Din-rail | ||
Dimension(W*D*H) mm | 30*98*130mm | ||
Weight | 0.56 kg | ||
Operating environment | |||
Operating temperature | -40℃~+75℃ | ||
Storage/transportation temperature) | -40℃~+85℃ | ||
Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | ||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | ||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | |||
DIP: IEC 61000-4-11 Level 3（10V） | |||
ESD: IEC 61000-4-2 Level 4（8K/15K） | |||
Shock：IEC 60068-2-27 | |||
Free fall：IEC 60068-2-32 | |||
Vibration：IEC 60068-2-6 | |||
Certification | CCC/CE/UKCA/RoHS/REACH/FCC | ||
MTBF | ＞200,000 hours | ||
Warranty | 5 years | ||
Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
Genuine Source Factory•Robust R&D Support
Custom Marvell-Based Ethernet Switch OEM/ODM Solutions
Landline
+86-755-28687362
Whatsapp/Teams/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
Managed Industrial Ethernet Switch
Managed Industrial PoE Switch
Managed Industrial PoE++ Switch
Managed Industrial Boost PoE Switch
Managed Industrial Fiber Bypass Switch
Unmanaged Industrial Ethernet Switch
Unmanaged Industrial PoE/PoE++ Switch
Industrial Media Converter
Industrial PoE Media Converter
Industrial Boost Power Supply
Landline
+86-755-28687362
Whatsapp/Skype/Wechat/
Mobile:+86-137-1429-3521
peter@smartbyte.com.cn
SmartByte Manufacturing Facility
Add：7-8th floor, 1st building, Lihe Youke Innovation Base, Zhenlong town, Huiyang district, Huizhou city
SmartByte R & D Center
Add: 2nd building, Huajian Edifice, Technology East Road, Haixi Technology Park, Fuzhou City
Copyright © 2026 SMARTBYTE. All Rights Reserved
