The SmartByte LT-IS3009FP-1FX8TX series are unmanaged industrial grade PoE switches with 8-port 10/100Base-TX PoE and 1-port 100Base-FX fiber optical interface. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, they are featuring with port isolation, 250m long distance transmission mode (1-8 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
LT-IS3009FP-1FX8TX series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃to 75℃as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
➢ 8*10/100Base-TX RJ45 PoE ports, 1*100Base-FX SFP(SC/ST optional) fiber port
➢ DC 44-57V input, redundant power supply with polarity reverse protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function:
1.Port isolation; 2. 250m long distance; 3. QoS (1-2 ports); 4. PoE watchdog
➢ Support 9K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3009FP-1FX8TX | |||
Interface | Fiber port | Copper RJ45 ports | ||
1 | 8 | |||
Ethernet | 8*10/100Base-TX PoE 1*100Base-FX SFP (SC/ST optional) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE | |||
Dip Switch | 1. Port Isolation 2. 250m long distance mode 3. QoS(1-2 ports) 4. PoE watchdog | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(PoE usage indicator) Red | Off: total PoE usage <rated 50% | |||
Blinking: rated 50%<total PoE usage<rated 90% | ||||
On: total PoE usage ≥ rated 90% | ||||
1-8(Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: PoE not working | |||
On: ports link up | On: PoE working | |||
Blinking: data on TX/RX | ||||
9 ( Fiber port) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 44-57VDC, redundant power input | |||
Input current | 5.6A Max | |||
Total power consumption | Full loading without PoE ≤5W PoE power budget ≤ 240W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 1.8G | |||
Packet forwarding rate | 2.67 Mpps | |||
MAC address table | 2K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 2Kbits | |||
Forwarding delay | <100us | |||
Jumbo Frame | Support 9Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Network Topology | ||||
Star topology | Support | |||
Bus topology | Support | |||
Tree Topology | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H) mm | 48*98*130mm | |||
Weight | 0.70 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%(non-condensing) | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV)(8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV)(10/700us) | ||||
DIP: IEC 61000-4-11 Level 3(10V) | ||||
ESD: IEC 61000-4-2 Level 4(8K/15K) | ||||
Shock:IEC 60068-2-27 | ||||
Free fall:IEC 60068-2-32 | ||||
Vibration:IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |||
MTBF | >200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS3009FP-1FX8TX | Unmanaged industrial PoE switch with 8*10/100Base-TX PoE ports and 1*100Base-FX SFP slot, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Operation temperature: -40℃~+75℃ |
LT-IS3009FP-1FX8TX-SC/ST | Unmanaged industrial PoE switch with 8*10/100Base-TX PoE ports and 1*100Base-FX SC or ST port, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply; Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃~+75℃ |

Copy product links
Long by picture save/share
Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch
The SmartByte LT-IS3009FP-1FX8TX series are unmanaged industrial grade PoE switches with 8-port 10/100Base-TX PoE and 1-port 100Base-FX fiber optical interface. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, they are featuring with port isolation, 250m long distance transmission mode (1-8 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
LT-IS3009FP-1FX8TX series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃to 75℃as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
➢ 8*10/100Base-TX RJ45 PoE ports, 1*100Base-FX SFP(SC/ST optional) fiber port
➢ DC 44-57V input, redundant power supply with polarity reverse protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function:
1.Port isolation; 2. 250m long distance; 3. QoS (1-2 ports); 4. PoE watchdog
➢ Support 9K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3009FP-1FX8TX | |||
Interface | Fiber port | Copper RJ45 ports | ||
1 | 8 | |||
Ethernet | 8*10/100Base-TX PoE 1*100Base-FX SFP (SC/ST optional) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE | |||
Dip Switch | 1. Port Isolation 2. 250m long distance mode 3. QoS(1-2 ports) 4. PoE watchdog | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(PoE usage indicator) Red | Off: total PoE usage <rated 50% | |||
Blinking: rated 50%<total PoE usage<rated 90% | ||||
On: total PoE usage ≥ rated 90% | ||||
1-8(Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: PoE not working | |||
On: ports link up | On: PoE working | |||
Blinking: data on TX/RX | ||||
9 ( Fiber port) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 44-57VDC, redundant power input | |||
Input current | 5.6A Max | |||
Total power consumption | Full loading without PoE ≤5W PoE power budget ≤ 240W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 1.8G | |||
Packet forwarding rate | 2.67 Mpps | |||
MAC address table | 2K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 2Kbits | |||
Forwarding delay | <100us | |||
Jumbo Frame | Support 9Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Network Topology | ||||
Star topology | Support | |||
Bus topology | Support | |||
Tree Topology | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H) mm | 48*98*130mm | |||
Weight | 0.70 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%(non-condensing) | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV)(8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV)(10/700us) | ||||
DIP: IEC 61000-4-11 Level 3(10V) | ||||
ESD: IEC 61000-4-2 Level 4(8K/15K) | ||||
Shock:IEC 60068-2-27 | ||||
Free fall:IEC 60068-2-32 | ||||
Vibration:IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |||
MTBF | >200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS3009FP-1FX8TX | Unmanaged industrial PoE switch with 8*10/100Base-TX PoE ports and 1*100Base-FX SFP slot, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Operation temperature: -40℃~+75℃ |
LT-IS3009FP-1FX8TX-SC/ST | Unmanaged industrial PoE switch with 8*10/100Base-TX PoE ports and 1*100Base-FX SC or ST port, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply; Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃~+75℃ |

Copy product links
Long by picture save/share
LT-IS3009FP-1FX8TX Series
The SmartByte LT-IS3009FP-1FX8TX series are unmanaged industrial grade PoE switches with 8-port 10/100Base-TX PoE and 1-port 100Base-FX fiber optical interface. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. Moreover, they are featuring with port isolation, 250m long distance transmission mode (1-8 ports), QoS (1-2 ports) and PoE watchdog function, which all can be configured by the Dip switch on the top panel.
LT-IS3009FP-1FX8TX series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, such as wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40℃to 75℃as well as high-level EMI/EMC capability and so on. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions exceed commercial product specifications.
➢ 8*10/100Base-TX RJ45 PoE ports, 1*100Base-FX SFP(SC/ST optional) fiber port
➢ DC 44-57V input, redundant power supply with polarity reverse protection
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Dip switch function:
1.Port isolation; 2. 250m long distance; 3. QoS (1-2 ports); 4. PoE watchdog
➢ Support 9K Bytes Jumbo frame
➢ Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. | LT-IS3009FP-1FX8TX | |||
Interface | Fiber port | Copper RJ45 ports | ||
1 | 8 | |||
Ethernet | 8*10/100Base-TX PoE 1*100Base-FX SFP (SC/ST optional) | |||
Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Power-Over-Ethernet IEEE 802.3at Power Over Ethernet plus PSE | |||
Dip Switch | 1. Port Isolation 2. 250m long distance mode 3. QoS(1-2 ports) 4. PoE watchdog | |||
LED Indicators | P(Power indicator) Green | Off: the device is power off or failed | ||
On: the device power on is normal | ||||
S(PoE usage indicator) Red | Off: total PoE usage <rated 50% | |||
Blinking: rated 50%<total PoE usage<rated 90% | ||||
On: total PoE usage ≥ rated 90% | ||||
1-8(Copper ports) | Green indicators | Yellow indicators | ||
Off: ports link down | Off: PoE not working | |||
On: ports link up | On: PoE working | |||
Blinking: data on TX/RX | ||||
9 ( Fiber port) Green | Off: ports link down | |||
On: ports link up | ||||
Blinking: data on TX/RX | ||||
Power parameters | ||||
Input voltage | 44-57VDC, redundant power input | |||
Input current | 5.6A Max | |||
Total power consumption | Full loading without PoE ≤5W PoE power budget ≤ 240W | |||
Connector | Removable 4-pin terminal block | |||
Switching features | ||||
Switching capacity | 1.8G | |||
Packet forwarding rate | 2.67 Mpps | |||
MAC address table | 2K | |||
VLAN | Support the transmission of the packets with VLAN tags ranging from 1 to 4096 | |||
Buffer | 2Kbits | |||
Forwarding delay | <100us | |||
Jumbo Frame | Support 9Kbytes | |||
MDI/MDIX | Support | |||
Watchdog | Support | |||
Network Topology | ||||
Star topology | Support | |||
Bus topology | Support | |||
Tree Topology | Support | |||
Mechanical structure | ||||
Case protection | IP40 | |||
Installation method | Din-rail | |||
Dimension(W*D*H) mm | 48*98*130mm | |||
Weight | 0.70 kg | |||
Operating environment | ||||
Operating temperature | -40℃~+75℃ | |||
Storage/transportation temperature | -40℃~+85℃ | |||
Relative humidity | 5%~95%(non-condensing) | |||
Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV)(8/20us) | |||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV)(10/700us) | ||||
DIP: IEC 61000-4-11 Level 3(10V) | ||||
ESD: IEC 61000-4-2 Level 4(8K/15K) | ||||
Shock:IEC 60068-2-27 | ||||
Free fall:IEC 60068-2-32 | ||||
Vibration:IEC 60068-2-6 | ||||
Certification | CCC/CE/FCC/RoHS/UKCA/Reach | |||
MTBF | >200,000 hours | |||
Warranty | 5 years | |||
Model | Description |
LT-IS3009FP-1FX8TX | Unmanaged industrial PoE switch with 8*10/100Base-TX PoE ports and 1*100Base-FX SFP slot, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Operation temperature: -40℃~+75℃ |
LT-IS3009FP-1FX8TX-SC/ST | Unmanaged industrial PoE switch with 8*10/100Base-TX PoE ports and 1*100Base-FX SC or ST port, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply; Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃~+75℃ |

Copy product links
Long by picture save/share

Related Products
48*1G/10GBase-X slots, 6*40G/50G/100GBase-X slots Marvell-based Data Center Switch
48 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000BASE-T Ports, 8* 10G SFP+ Ports
24 *10/100/1000/2500BASE-T Ports, 6* 25G SFP28 Ports
48 *10/100/1000BASE-T RJ45 Ports, 6* 25G SFP28 Ports
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE Switch
48*10/100/1000Base-T + 4*1G/2.5G/10G SFP + Layer 3 Managed PoE++ Switch