Release/7.3.x
hotfix /7.3.11
- Revise the CPU utilization obtained from private MIB nodes to be the average within
1 minute
- Supports SPI chip gd25q32
hotfix /7.3.10
- Added the command `ssh-server enable security` to disable weak encryption algorithms.
hotfix /7.3.9
- Added log notification when BPDU-guard port goes down.
- Optimized the display information of the show system resource command.
- Changed the default HTTPS certificate information.
hotfix /7.3.8
- Revise MIB to support OID 0.
- Update the Russian page of the WEB.
hotfix /7.3.7
- Added MIB node to support reading port rx/tx traffic bandwidth information.
- Optimize the display information of POE port and add the display port AT/BT type.
hotfix /7.3.6
- Added support for SHA-256 and SHA-512 encryption algorithms for user passwords.
- Revised the DHCP snooping exception handling when the trust port receives a request packet.
- Added support for DNS functionality.
- Added support for NTP server domain name configuration.
- Added support for blocking users for a period of time after multiple failed login attempts.
- Added support for DHCP relay.
- Added support for QoS-based port queue egress traffic shaping.
- Added support for syslog logging of user web logins, logouts, and login failures.
- Added support for modifying user permissions using the enable command.
- Added support for Layer 4 port configuration for Telnet and SSH.
- Modified the ARP interface display for the management port, changing it from tap0 to mgmt.
- Added support for the PSE 8238C series POE chips.
hotfix /7.3.5
- Revised the serial function, the maximum number of client connections to the server has been increased from 8 to 64
hotfix /7.3.4
- Some products support Russian language selection on WEB
hotfix /7.3.3
- Revised the format of some nodes in LLDP MIB
- Added WEB support for Korean language
hotfix /7.3.2
- Support LLDP protocol to send messages to block ports, and the device does not learn the MAC address of LLDP packets
hotfix /7.3.1
- The WEB side supports displaying MAC address information
- Revised WEB side log information maintenance
- Added support for MAC5 chip series small port industrial products
Release/7.3.0
- Support anti-DOS attack function
- Support DHCP client/slaac function of SVI/routing port
- Support ACL application on VLAN, currently only supported by CLI
- Supports user privilege management, only supported by CLI
- Support IPv6 server address configuration of NTP and SNMP
- Support WEB-based syslog server configuration
- Support WEB-based IPv6 static neighbor and static routing configuration
- Support the creation and deletion of SVI ports. SVI ports are no longer created along with VLAN
- Support some TCP/UDP MIB nodes, please refer to the MIB documentation for details
- Revise the USB information display command to support the show USB UID command
Release-7.1.x
Hotfix/7.1.10
- Restrict rpcbind L4-port to external access
Hotfix/7.1.9
- Added support for 4 products in the smb-mac5-16gt4gs-l series
- Revise the I2C driver of AC5 series products, and add the operation of sending a reset signal to the load when I2C hangs due to abnormal load.
Hotfix/7.1.8
- Support Station SW-MIB
Hotfix/7.1.7
- Support 2 new products smb-mac3lc-8gt8gs4gs-d and smb-mac5-8gt4gs-ld
Hotfix/7.1.6
- Support RSPAN function and SPAN function based on VLAN
Hotfix/7.1.5
- Revise SNMP web configuration, community and host can be independently configured and applied.
Hotfix/7.1.4
- Revised 16GT8GS4GS product with 8GS port supporting 100base fx
- Revise industrial 2U products due to QSGMII abnormality and port lighting error issue
- Revised to support admin users logging in for the first time, requiring mandatory password changes
- Revised to support terminal length command
Hotfix/7.1.3
- Added support for 3 POE devices in the MAC5 series
Hotfix/7.1.2
- Mib supports oid customization function
- Revise the threshold alarm of the optical module to address the issue of using the same oid for both warning and alarm
Hotfix/7.1.1
- Support MSTP instance config ability for VLAN 1
- Support smb-mac5-8gt4gs serial 8 products
- Support VLAN name display and configuration by web
- Support DHCP snooping option-82 sub-option normal format and cisco format
- Support user admin login original password alert
Release/7.1.0
- Reconstruct the ACL module, support IPv6-based ACL and support apply in the out direction
- Support medium adaptive function for combo port
- Mib that supports cable detection
- Supports sflow function, only supports CLI management
- Supports web management of remote - id and circuit - id
- Mib that support port management, such as port rate, etc.
- Mib that support optical module information
- Support syslog management
- Mib that support PoE module
- NTP supports configuring ipv6 server address
- Support ACL-based telnet and ssh access control management
- Revise the maximum number of users managed by dhcp snooping to 2048
- Support snmp server as ipv6 address
- The ecc check bit of nand is revised to 4bit. For newly produced devices of 7.1.x, the fallback to the old version of 6.x is not supported.
Release/7.0.0
- Supports 2 products of SMB-MAC5-24GT4GS-L series
- Re-support https function for ac5 serial switch
- Support remote - id and circuit - id customization, only support CLI command line
