Overview
The SmartByte LT-IS6318GP-2GX16GT is the highly reliable layer 2+ managed industrial PoE switch with 16-port 10/100/1000-T PoE and 2-port 1G/2.5GBase-X SFP slots. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. It also supports Layer 3 IPv4/IPv6 static routing features and powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
LT-IS6318GP-2GX16GT is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial.
Features
➢ 16*10/100/1000Base-T RJ45 PoE, 2*1G/2.5GBase-X SFP
➢ Redundant power DC 44-57V input with polarity reverse/over-voltage/over-current
protection
➢ Support one digital output for relay alarm(terminal block Pin 5/6)
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
➢ Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP,
RSTP,MSTP/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
DDM/IPV6 management/Web/PoE management/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. |
LT-IS6318GP-2GX16GT |
|||
Interface |
Fiber ports |
Copper RJ45 ports |
||
2 |
16 |
|||
Ethernet |
16*10/100/1000Base-T RJ45PoE 2*1G/2.5GBase-X SFP |
|||
Management port |
1*RJ45 Console port (115200,8,N,1) |
|||
Alarm port |
One digital output for relay alarm, alarm relay current carry ability: 1A@24VDC |
|||
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+ |
|||
LED Indicators |
||||
P(Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
||
S (System status indicator) |
Blinking: device initialization |
On: device on normal operation |
||
1-16 (Copper ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking:data on TX/RX |
||||
1-16 (PoE status indicators) Yellow |
Off: PoE not working |
|||
On: PoE working |
||||
17-18(Fiber ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
Power parameter |
||||
Input voltage |
44-57VDC(802.3af) 52-57VDC(802.3at) redundant power input |
|||
Input current |
5.8A Max |
|||
Total power consumption |
Full loading without PoE ≤15W PoE power budget ≤ 240W |
|||
Connector |
Removable 6-pin terminal block, Pin 5-6 for relay alarm |
|||
Reverse polarity protection |
Support |
|||
Over-voltage protection |
Support |
|||
Over-current protection |
Support |
|||
Layer 2 functions |
||||
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
|||
Port features |
Support IEEE802.3x flow control, Support interface counters, Support port isolation, Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
|||
Mac-address table management |
Support static Mac-addressmanagement Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
|||
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|||
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
||||
GVRP |
Normal mode Fixed mode Forbidden mode |
|||
QinQ |
Port-based QinQ VLAN-based QinQ Flow-based QinQ |
|||
LLDP |
LLDP (Link Layer Discovery Protocol) |
|||
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
|||
Support G.8032 ERPS protocol,single ring, sub Ring andmajor ring Recovery time ≤20ms |
||||
L2Multicast |
||||
IGMP snooping |
Support IGMP snooping |
|||
Group address |
Support group address |
|||
Security functions |
||||
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
|||
QoS |
Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-basedrate-limit Egress port-basedrate-limit Support policy-based QoS |
|||
802.1x |
Port access control Mac-address access control RADIUS server |
|||
Port-security |
Port-security |
|||
IP source guard |
IP Port/MAC binding |
|||
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
|||
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
|||
Management & Maintenance functions |
||||
User Management |
Support password protection Support user authorization management |
|||
SNMP |
Supporting SNMPV1/V2C/V3 version |
|||
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
|||
CLI management |
Console/Telnet command line management |
|||
RMON |
Support RMON(Remote Monitoring) alarm |
|||
Firmware upgrade |
Firmwareupgrade |
|||
Fault Detection |
Ping/Tracerout Dying gasp Support optical transceiver DDM function |
|||
Cable detection |
Support copper port cable detection |
|||
PoE management |
Support 802.3af/802.3at |
|||
Support PD watchdog |
||||
Support PoE priority management |
||||
Support Max PoE power configuration for each port |
||||
Support alarm waterline configuration |
||||
Support reserved power configuration |
||||
NTP |
Network Time Protocol |
|||
Syslog/Debug |
Syslog/Debug Syslog send to three servers |
|||
Configuration import/export |
Support FTP/TFTP remote import/export |
|||
Dual partition management |
Support dual partition switching |
|||
Application Protocol Functions |
||||
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
|||
DHCP client |
Support DHCP client |
|||
Telnet server |
Support telnet server |
|||
Telnet client |
Support telnet client |
|||
SSH server |
Support SSH server |
|||
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
|||
sflow |
Support network traffic analysis |
|||
TFTP |
Support TFTP Client |
|||
Layer 3 functions |
||||
ARP |
ARP table aging |
|||
DHCP server |
||||
IPv4 / IPv6 |
static routing |
|||
Switching features |
||||
Switching capacity |
42Gbps |
|||
Packet forwarding rate |
62.5Mpps |
|||
MAC address table |
16K |
|||
VLAN |
4K |
|||
Buffer |
12Mbit |
|||
Forwarding delay |
<5us |
|||
Jumbo Frame |
Support 10Kbytes |
|||
MDX/MIDX |
Support |
|||
Watchdog |
Support |
|||
Mechanical structure |
||||
Case protection |
IP40 |
|||
Installation method |
Din-rail |
|||
Dimension(W*D*H)mm |
54*115*158mm |
|||
Weight |
1.55 kg |
|||
Operating environment |
||||
Operating temperature |
-40℃~+75℃ |
|||
Storage/transportation temperature |
-40℃~+85℃ |
|||
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|||
Industrial Standard |
||||
EMS |
Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
|||
EMI |
FCC Part 15B Class A |
|||
Shock |
IEC 60068-2-27 |
|||
Free fall |
IEC 60068-2-32 |
|||
Vibration |
IEC 60068-2-6 |
|||
Certification |
CCC/CE/UKCA/RoHS/REACH/FCC |
|||
MTBF |
>200,000 hours |
|||
Warranty |
5 years |
Model |
Description |
LT-IS6318GP-2GX16GT |
L2+ Managed industrial PoE switch with 16*10/100/1000Base-T RJ45 PoE ports and 2*1G/2.5GBase-XSFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃~+75℃ |