Model No. |
LT-IMC30G-1GX2GT-E |
|||
Interface |
Fiber port |
Copper RJ45 ports |
||
1 |
2 |
|||
Ethernet |
2*10/100/1000Base-T RJ45 1*100/1000Base-X SFP (SC/ST/FC optional) |
|||
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet |
|||
Dip Switch |
1. Port Isolation 2. Flow control 3. Broadcast storm restrain 4. Fiber port 100/1000M selection |
|||
LED Indicators |
P(Power indicator) Green |
Off: the device is power off or failed |
||
On: the device power on is normal |
||||
S(System indicator) Red |
Off: the chip is normal |
|||
On: the chip read/write is unnormal |
||||
1-2 (Copper ports) |
Green indicators |
Yellow indicators |
||
Off: ports link down |
Off: port speed is 10/100M |
|||
On: ports link up |
On: port speed is 1000M |
|||
Blinking: data on TX/RX |
||||
3 ( Fiber port) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
Power parameters |
||||
Input voltage |
12-58VDC, redundant power input |
|||
Input current |
0.2A Max |
|||
Total power consumption |
Full loading ≤2.5W |
|||
Connector |
Removable 4-pin terminal block |
|||
Reverse polarity protection |
Support |
|||
Over-voltage protection |
Support |
|||
Switching features |
||||
Switching capacity |
6G |
|||
Packet forwarding rate |
8.92 Mpps |
|||
MAC address table |
8K |
|||
VLAN |
4K |
|||
Buffer |
1M |
|||
Forwarding delay |
<5us |
|||
Jumbo Frame |
Support 10Kbytes |
|||
MDX/MIDX |
Support |
|||
Watchdog |
Support |
|||
Network Topology |
||||
Star topology |
Support |
|||
Bus topology |
Support |
|||
Tree Topology |
Support |
|||
Mechanical structure |
||||
Case protection |
IP40 |
|||
Installation method |
Din-rail |
|||
Dimension(W*D*H)mm |
30*85*85mm |
|||
Weight |
0.21 kg |
|||
Operating environment |
||||
Operating temperature |
-40℃~+75℃ |
|||
Storage/transportation temperature |
-40℃~+85℃ |
|||
Relative humidity |
5%~95%(non-condensing) |
|||
Industrial Standard |
Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV)(8/20us) |
|||
Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV)(10/700us) |
||||
DIP: IEC 61000-4-11 Level 3(10V) |
||||
ESD: IEC 61000-4-2 Level 4(8K/15K) |
||||
Shock:IEC 60068-2-27 |
||||
Free fall:IEC 60068-2-32 |
||||
Vibration:IEC 60068-2-6 |
||||
Certification |
CCC/CE/FCC/RoHS |
|||
Warranty |
5 years |
Model |
Description |
LT-IMC30G-1GX2GT-E |
10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SFP slot, DC12-58V input, redundant dual power supply, Din-rail installation. Fiber port transmission distance depending on the SFP module; Operation temperature: -40℃~+75℃ |
LT-IMC30G-1GX2GT-SC-E |
10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X SC port, DC12-58V input, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃~+75℃ |
LT-IMC30G-1GX2GT-FC-E |
10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X FC port, DC12-58V input, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃~+75℃ |
LT-IMC30G-1GX2GT-ST-E |
10/100/1000Base-T to 1000Base-X unmanaged compact industrial media converter with 2*10/100/1000Base-T RJ45 ports and 1*100/1000Base-X ST port, DC12-58V input, redundant dual power supply, Din-rail installation; Multi-mode/Single mode/ dual fiber/single fiber, 550m -100KM optional; Operation temperature: -40℃~+75℃ |