Overview
The SmartByte LT-IS6312XGP-4XS8GT is the highly reliable managed industrial PoE switch with 8-port 10/100/1000-T RJ45, 4-port 1G/2.5G/10GBase-X SFP+ interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. LT-IS6312XGP-4XS8GT also supports Layer 3 IPv4/IPv6 static routing features and powerful Layer 2 management and secure function, which all making them ideal for large-scale industrial networks.
LT-IS6312XGP-4XS8GT is a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 8*10/100/1000Base-T RJ45 PoE, 4*1G/2.5G/10GBase-X SFP+
➢ DC 44-57V input, redundant power supply with polarity reverse/over-voltage protection
➢ Support one digital output for relay alarm (terminal block Pin 5/6)
➢ Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard
➢ Layer 3 features: Support IPv4/IPv6 static routing, DHCP server
➢ Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,MSTP
/Port Mirroring/DHCP/Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP DDM
/IPV6 management/PoE management/Web/SNMP/Telnet/TFTP/Web upgrading
➢ Support G.8032 ERPS protocol, recovery time ≤20ms
➢ Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less and Din-rail hardware design
➢ Operation temperature: -40 ℃ ~+75℃
Model No. |
LT-IS6312XGP-4XS8GT |
||
Interface |
Fiber ports |
Copper RJ45 ports |
|
4 |
8 |
||
Ethernet |
8*10/100/1000Base-T RJ45 PoE 4*1G/2.5G/10GBase-X SFP+ |
||
Management port |
1*RJ45 Console port (115200,8,N,1) |
||
Alarm port |
One digital output for relay alarm,alarm relay current carry ability: 1A@24VDC |
||
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE 802.3af PoE IEEE 802.3at PoE+ |
||
LED Indicators |
|||
P (Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
|
S (System status indicator) |
Blinking: device initialization |
On: device on normal operation |
|
1-8 (Copper ports indicators) Green |
Off: ports link down |
||
On: ports link up |
|||
Blinking:data on TX/RX |
|||
1-8(PoE status indicators) Yellow |
Off: PoE not working |
||
On: PoE working |
|||
9-12(Fiber ports indicators) Green |
Off: ports link down |
||
On: ports link up |
|||
Blinking: data on TX/RX |
|||
Power parameter |
|||
Input voltage |
44-57VDC(802.3af) 52-57VDC(802.3at) redundant power input |
||
Input current |
5.8A Max |
||
Total power consumption |
Full loading without PoE ≤18W PoE power budget≤ 240W |
||
Connector |
Removable 6-pin terminal block, Pin 5-6 for relay alarm |
||
Reverse polarity protection |
Support |
||
Over-voltage protection |
Support |
||
Over-current protection |
Support |
||
Layer 2 functions |
|||
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
||
Port features |
Support IEEE802.3x flow control, Support interface counters, Support port isolation, Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
||
Mac-address table management |
Support static Mac-addressmanagement Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
||
VLAN |
Support access mode Support trunk mode Support hybrid mode |
||
VLAN classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
||
GVRP |
Normal mode Fixed mode Forbidden mode |
||
QinQ |
Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ |
||
LLDP |
LLDP (Link Layer Discovery Protocol) |
||
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
||
Support G.8032 ERPS protocol,single ring, sub Ring andmajor ring Recovery time ≤20ms |
|||
L2Multicast |
|||
IGMP snooping |
Support IGMP snooping |
||
Group address |
Support group address |
||
Security functions |
|||
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
||
QoS |
Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-basedrate-limit Egress port-basedrate-limit Supportpolicy-based QoS |
||
802.1x |
Port access control Mac-address access control RADIUS server |
||
Port-security |
Port-security |
||
IP source guard |
IP Port/MAC binding |
||
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
||
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
||
Management & Maintenance functions |
|||
User Management |
Support password protection Support userauthorization management |
||
SNMP |
Supporting SNMPV1/V2C/V3 version |
||
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
||
CLI management |
Console/Telnet command line management |
||
RMON |
Support RMON(Remote Monitoring) alarm |
||
Firmware upgrade |
Firmware upgrade |
||
Fault Detection |
Ping/Tracerout Dying gasp Support optical transceiver DDM function |
||
Cable detection |
Support copper port cable detection |
||
PoE management |
Support 802.3af/802.3at |
||
Support PD watchdog |
|||
Support PoE priority management |
|||
Support Max PoE power configuration for each port |
|||
Support alarm waterline configuration |
|||
Support reserved power configuration |
|||
NTP |
Network Time Protocol |
||
Syslog/Debug |
Syslog/Debug Syslog send tothree servers |
||
Configuration import/export |
Support FTP/TFTP remote import/export |
||
Dual partition management |
Support dual partition switching |
||
Application Protocol Functions |
|||
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
||
DHCP client |
Support DHCP client |
||
Telnet server |
Support telnet server |
||
Telnet client |
Support telnet client |
||
SSH server |
Support SSH server |
||
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
||
sflow |
Support network traffic analysis |
||
TFTP |
Support TFTP Client |
||
Layer 3 functions |
|||
ARP |
ARP table aging |
||
DHCP server |
|||
IPv4 / IPv6 |
static routing |
||
Switching features |
|||
Switching capacity |
96Gbps |
||
Packet forwarding rate |
142.8Mpps |
||
MAC address table |
16K |
||
VLAN |
4K |
||
Buffer |
12Mbit |
||
Forwarding delay |
<5us |
||
Jumbo Frame |
Support 10Kbytes |
||
MDX/MIDX |
Support |
||
Watchdog |
Support |
||
Mechanical structure |
|||
Case protection |
IP40 |
||
Installation method |
Din-rail |
||
Dimension(W*D*H)mm |
54*115*158mm |
||
Weight |
1.25 kg |
||
Operating environment |
|||
Operating temperature |
-40℃~+75℃ |
||
Storage/transportation temperature |
-40℃~+85℃ |
||
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
||
Industrial Standard |
|||
EMS |
Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
||
EMI |
FCC Part 15B Class A |
||
Shock |
IEC 60068-2-27 |
||
Free fall |
IEC 60068-2-32 |
||
Vibration |
IEC 60068-2-6 |
||
Certification |
CCC/CE/UKCA/RoHS/REACH/FCC |
||
MTBF |
>200,000 hours |
||
Warranty |
5 years |
Model |
Description |
LT-IS6312XGP-4XS8GT |
L2+ Managed industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 4*1G/2.5G/10G Base-X SFP+ slots,complies with IEEE802.3af, IEEE802.3 at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃~+75℃ |