SmartByte LT-S8528XGP-4XS16GT8GC is the Layer 3 Managed PoE Switch that provides high-density performance, Layer 3 static and dynamic routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 128 Gbps switching capacity and 4 *1G/2.5G/10Gbps flexible and high performance uplink capability . The LT-S8528XGP-4XS16GT8GC provides comprehensive end to end QoS as well as flexible and rich management , security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks based on cost effective price. With total power consumption up to 440W ( 850w optional ), they offer a rack-mountable, affordable, safe and reliable power solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data security and network traffic management.
Features:
Model No. |
LT-S8528XGP-4XS16GT8GC |
|||
Interface |
Fiber ports |
Copper RJ45 ports |
Gigabit Combo |
|
4 |
16 |
8 |
||
Ethernet |
16*10/100/1000Base-T RJ45 PoE 8*COMBO SFP/RJ45 4*1G/2.5G/10GBase-X SFP+ |
|||
Management port |
1*RJ45 Console port (115200,8,N,1),1*USB 2.0 for configuration and firmware update |
|||
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP
IEEE 802.3af |
|||
LED Indicators |
||||
PWR (Power indicator) |
Off:the device is power off or failed |
On: the device power on is normal |
||
SYS(System status indicator) |
Blinking: device initialization |
On: device on normal operation |
||
USB(USB status indicator) |
Off: USB flash drive not insert or not detected by device |
|||
On: USB flash drive is detected by device |
||||
Blinking: the device is reading and writing the data from USB flash drive |
||||
1-16 (Copper ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking:data on TX/RX |
||||
1-16(PoE status indicators) Yellow |
Off: PoE not working |
|||
On: PoE working |
||||
17-24 (Copper ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking:data on TX/RX |
||||
17-24(PoE status indicators) Yellow |
Off: PoE not working |
|||
On: PoE working |
||||
17-24(Fiber ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
25-28(Fiber ports indicators) Green |
Off: ports link down |
|||
On: ports link up |
||||
Blinking: data on TX/RX |
||||
Power parameter |
||||
Input voltage |
AC 100-240V |
|||
Total power consumption |
Full loading ≤ 440W (850W optional) |
|||
Over-current protection |
Support |
|||
Layer 2 functions |
||||
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support 10GE aggregation Support static aggregation Support LACP dynamic aggregation Up to 64 aggregation groups and up to 8 ports per group |
|||
Port features |
Support IEEE802.3x flow control Support interface counters Support port isolation Port mirroring ( One-to-One,Many-to-One) Support loop detection(Port-based; VLAN-based) Support broadcast storm suppression(broadcast; unknown multicast; unknown unicast) |
|||
Mac-address table management |
Support static Mac-address management Support dynamic Mac-address Management Support filtering Mac-address Support MAC limit based on port and VLAN Support MAC flapping based on port and VLAN |
|||
VLAN |
Support access mode Support trunk mode Support hybrid mode |
|||
VLAN classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
|||
GVRP |
Normal mode Fixed mode Forbidden mode |
|||
QinQ |
Port-based QinQ VLAN-based QinQ (VLAN-stacking; VLAN-mapping) Flow-based QinQ |
|||
LLDP |
LLDP (Link Layer Discovery Protocol) |
|||
Ring network protocol |
Support IEEE802.1D-STP Support IEEE802.1W-RSTP Support IEEE802.1S-MSTP |
|||
Support G.8032 ERPS protocol,single ring, sub Ring and major ring Recovery time ≤20ms |
||||
L2 Multicast |
||||
IGMP snooping |
Support IGMP snooping |
|||
Group address |
Support group address |
|||
Security functions |
||||
ACL |
IP Standard ACL MAC extend ACL IP extend ACL IPv6 ACL |
|||
QoS |
Support QoS Class,remarking Support SP, WRR queue scheduling Ingress port-based rate-limit Egress port-based rate-limit Support policy-based QoS |
|||
802.1x |
Port access control Mac-address access control RADIUS server |
|||
Port-security |
Port-security |
|||
IP source guard |
IP Port/MAC binding |
|||
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
|||
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
|||
Management& Maintenance functions |
||||
User Management |
Support password protection Support user authorization management |
|||
SNMP |
Supporting SNMPV1/V2C/V3 version |
|||
Web Management |
Web Management Support HTTP V1.1 Support HTTPS |
|||
CLI management |
Console/Telnet command line management |
|||
RMON |
Support RMON(Remote Monitoring) alarm |
|||
Firmware upgrade |
Firmware upgrade |
|||
Fault Detection |
Ping/Tracerout Support optical transceiver DDM function |
|||
Cable detection |
Support copper port cable detection |
|||
PoE management |
Support 802.3af/802.3at |
|||
Support PD watchdog |
||||
Support PoE priority management |
||||
Support Max PoE power configuration for each port |
||||
Support alarm waterline configuration |
||||
Support reserved power configuration |
||||
NTP |
Network Time Protocol |
|||
Syslog/Debug |
Syslog/Debug Syslog send to three servers |
|||
Configuration import/export |
Support FTP/TFTP remote import/export Support USB import/export |
|||
Dual partition management |
Support dual partition switching |
|||
Application Protocol Functions |
||||
DHCP Snooping |
DHCP snooping trust port Support remote-id/circuit-id configuration DHCP option-82 |
|||
DHCP client |
Support DHCP client |
|||
Telnet server |
Support telnet server |
|||
Telnet client |
Support telnet client |
|||
SSH server |
Support SSH server |
|||
TACACS |
Support TACACS(the terminal access controller accesses the control system) |
|||
sflow |
Support network traffic analysis |
|||
TFTP |
Support TFTP Client |
|||
Layer 3 functions |
||||
ARP |
ARP table aging |
|||
DHCP server |
||||
IPv4 / IPv6 |
static routing |
|||
ECMP |
Support ECMP (Equal-cost multi-path routing) |
|||
Support the configuration of ECMP Max next-hop |
||||
Support capacity balanced configuration |
||||
Route policy |
IPv4 prefix-list |
|||
VRRP |
Virtual Router Redundancy Protocol |
|||
Routing Protocol Specification |
||||
RIP |
RIPv1/v2 |
|||
OSPFv2 |
OSPFv2 |
|||
BGP4 |
BGP4 |
|||
BGP Support Routing Recursive ECMP |
||||
Support to view the number of neighbors and up/down state |
||||
IS-IS |
IS-ISv4 |
|||
Routing entry |
13K |
|||
Switching features |
||||
Switching capacity |
128Gbps |
|||
Packet forwarding rate |
190.4Mpps |
|||
MAC address table |
16K |
|||
VLAN |
4K |
|||
Buffer |
12Mbit |
|||
Forwarding delay |
<5us |
|||
Jumbo Frame |
Support 10Kbytes |
|||
MDX/MIDX |
Support |
|||
Watchdog |
Support |
|||
Mechanical structure |
||||
Installation method |
Desktop; Rack-mount |
|||
Dimension(W*D*H)mm |
440*245*44mm |
|||
Weight |
4.1kg |
|||
Operating environment |
||||
Operating temperature |
-0℃~+50℃ |
|||
Storage/transportation temperature |
-10℃~+70℃ |
|||
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
|||
Certification |
CCC/CE/UKCA/RoHS/REACH/FCC |
|||
MTBF |
>100,000 hours |
Model |
Description |
LT-S8528XGP-4XS16GT8GC |
Layer 3 managed PoE switch with 4*1G/2.5G/10G SFP+ ports +16*10/100/1000M RJ45 PoE ports,8*1G SFP/RJ45 Combo ports,AC 100-240V 50/60Hz, total power consumption 440W (850W optional) |